LG washer not agitating, IE error: How to fix?

LG Washer Not Agitating, IE Error: How to Fix?

If you own an LG washer and it's not agitating properly, accompanied by an IE error code, it can be frustrating and inconvenient. However, there are several potential causes for this issue, and fortunately, most can be resolved without the need for professional assistance. In this article, we will guide you through some troubleshooting steps to help you fix your LG washer.

Step 1: Check the Water Supply

The IE error code usually indicates a water supply issue. Ensure that the water faucets connected to the washer are fully turned on and that there is adequate water pressure. Inspect the water hoses for any kinks, clogs, or leaks. Remove any kinks and clean out any obstructions if necessary.

Step 2: Clean the Filters

A clogged filter can restrict water flow and trigger the IE error code. Locate the water inlet filters, usually found at the back of the washer, and remove them. Rinse them thoroughly under running water to remove any debris or buildup. Once clean, reinstall the filters properly.

Step 3: Inspect the Water Inlet Valve

The water inlet valve controls the water flow into the washer. Turn off the water supply to the machine and disconnect the hoses from the inlet valve. Use a multimeter to check the valve for continuity. If there is no continuity, the valve may need to be replaced.

Step 4: Examine the Agitator

The agitator is responsible for moving the clothes around during the wash cycle. If it's not functioning correctly, it may cause the washer to not agitate. Remove any clothing from the washer and inspect the agitator for any visible damage or obstructions. If the agitator is damaged, it may need to be replaced.

Step 5: Check the Motor and Belt

A malfunctioning motor or a broken belt can prevent the agitator from working properly. Access the motor by removing the back panel of the washer. Inspect the belts for any signs of wear or damage. If the belts are worn or broken, they should be replaced. Additionally, if the motor is showing any signs of defectiveness, it may need professional repair or replacement.

Step 6: Reset the Washer

If none of the above steps have resolved the issue, try resetting the washer. Unplug the machine from the power source for a few minutes, then plug it back in. This simple reset can clear any temporary glitches in the washer's system.

By following these troubleshooting steps, you can resolve the issue of your LG washer not agitating and displaying the IE error code. However, if the problem persists or you are uncomfortable performing these repairs yourself, it is advisable to consult a professional LG technician for further assistance.