BMW X1 Oil Service Reset Instructions

If you own a BMW X1 and recently changed the oil yourself or had it done by a non-BMW service center, you might need to reset the oil service indicator. This is an important step to ensure that your oil change intervals are accurately tracked and monitored.

Step 1: Turn on the Ignition

Make sure the key is inserted into the ignition and turned to the "on" or "engine off" position. Avoid starting the engine at this time.

Step 2: Locate the OBC Button

Look for the OBC (On-Board Computer) button on the dashboard. It is usually located near the mileage display or on the turn signal stalk.

Step 3: Press and Hold the OBC Button

Press and hold the OBC button until the instrument cluster lights up and the service message appears on the display. This may take a few seconds.

Step 4: Scroll through the Service Menu

Once the service message appears, scroll through the menu using the OBC button or the arrow buttons on the turn signal stalk. Look for the "Vehicle Check" or "Oil Service" option.

Step 5: Select the "Vehicle Check" or "Oil Service" Option

Select the "Vehicle Check" or "Oil Service" option by pressing the OBC button or the arrow buttons. This will enable you to reset the oil service indicator.

Step 6: Reset the Oil Service Indicator

Press and hold the OBC button for a few seconds to reset the oil service indicator. Once reset, the display should show a new oil change interval or "OK" message.

Step 7: Turn off the Ignition

Turn off the ignition and remove the key from the ignition switch.

Following these steps should successfully reset the oil service indicator on your BMW X1. It is important to note that the exact method may vary slightly depending on the model year and specific configuration of your vehicle. If you encounter any difficulties or are unsure, consult your vehicle's owner's manual or contact an authorized BMW service center for assistance.