Steps for Ford Explorer oil change?

Learn how to perform an oil change for your Ford Explorer with our easy step-by-step guide. Ensure optimal engine health and longevity.

Subject: Ford Explorer oil change steps
Date: 12/22/2023 Status: SOLVED
3 answered / 2 voted, viewed icon

121 viewed.

Jake - Saturday, December 23, 2023 119

Steps for Ford Explorer Oil Change

Regular oil changes are an essential part of maintaining your Ford Explorer's engine and ensuring its longevity. By following the proper steps, you can complete an oil change on your Ford Explorer in no time. Here is a comprehensive guide on how to change the oil in your Ford Explorer.

Step 1: Gather the Necessary Tools and Equipment

Before starting the oil change process, gather all the required tools and equipment. This includes:

A new oil filter
A wrench or socket set
An oil filter wrench or pliers
A drain pan
Oil filter seal or gasket
A funnel
A rag or paper towels
The appropriate amount and type of motor oil (refer to your owner's manual)

Step 2: Prepare Your Vehicle

Park your Ford Explorer on a level surface and engage the parking brake. Allow the engine to cool down so you don't burn yourself while working with hot oil.

Step 3: Drain the Old Oil

Locate the oil drain plug underneath the engine. Position the drain pan beneath it to catch the old oil. Loosen the plug using a wrench or socket set, and then remove it by hand. Allow the old oil to completely drain into the pan.

Step 4: Replace the Oil Filter

Using an oil filter wrench or pliers, remove the old oil filter. Make sure to properly dispose of the old filter. Before installing the new oil filter, apply a thin film of oil onto the rubber gasket to ensure proper sealing. Hand-tighten the new filter in place.

Step 5: Add New Oil

Position a funnel in the oil filler hole located on top of the engine. Pour in the appropriate amount and type of motor oil as per your Ford Explorer's specifications. Refer to your owner's manual for the recommended oil capacity and viscosity. After adding the oil, securely replace the oil filler cap.

Step 6: Check the Oil Level

Start your vehicle and let it idle for a few minutes. Turn off the engine and wait for a minute or two to allow the oil to settle in the oil pan. Remove the dipstick, wipe it clean, and reinsert it. Pull it out again and check the oil level. It should be between the minimum and maximum marks on the dipstick. If necessary, add more oil and recheck the level.

Step 7: Dispose of the Old Oil Properly

It is crucial to dispose of the old oil in an environmentally-friendly manner. Seal the used oil in the drain pan and take it to a local waste disposal facility or an automotive repair shop that accepts used oil for recycling.

Congratulations! You have successfully completed the oil change process for your Ford Explorer. Regularly following these steps will help keep your engine in excellent condition and prolong its lifespan.

Accepted Answer

The best Reply

ANSWERS Write an Answer

❝Steps for Ford Explorer oil change?❞ answers. liam1988 asked first. Total 3 replies.

Ross - Tuesday, December 26, 2023 119

Steps for Ford Explorer Oil Change

Regularly changing the oil in your Ford Explorer is crucial to maintain the performance and longevity of your vehicle. An oil change involves draining out the old oil and replacing it with fresh oil to ensure smooth engine operation. Here, we will walk you through the step-by-step process of performing an oil change on your Ford Explorer.

Step 1: Gather the Required Tools and Materials

Before you begin, make sure you have the following tools and materials:

Oil filter wrench
Socket wrench set
Oil drain pan
New oil filter
New engine oil
Shop towels
Funnel
Oil filter drain tool (if needed)

Step 2: Prepare the Vehicle

Park your Ford Explorer on a level surface and engage the parking brake. Open the hood and locate the oil cap, which is typically labeled. Remove the oil cap to allow for proper drainage.

Step 3: Drain the Old Oil

Position the oil drain pan beneath the oil drain plug, which is usually located on the underside of the engine. Use a socket wrench to loosen the drain plug in a counterclockwise motion. Once the plug is loose, carefully remove it by hand. Allow the old oil to drain completely into the oil drain pan. This can take several minutes.

Step 4: Change the Oil Filter

Locate the oil filter, which is typically situated near the engine. Using an oil filter wrench, carefully remove the old oil filter in a counterclockwise direction. Before installing the new oil filter, apply a small amount of fresh oil to the rubber gasket. This helps ensure a proper seal. Carefully thread the new oil filter in a clockwise direction by hand until it's snug, and then use the oil filter wrench to tighten it a little further.

Step 5: Add New Oil

Using a funnel, pour the appropriate amount and type of new engine oil into the oil cap opening. Refer to your Ford Explorer's owner's manual for the correct oil specifications. Once you have poured in the new oil, securely tighten the oil cap.

Step 6: Check the Oil Level

Start the engine and let it run for a few minutes to allow the new oil to circulate. Turn off the engine and wait for a couple of minutes to allow the oil to settle in the oil pan. Carefully remove the oil dipstick, wipe it clean with a shop towel, then reinsert it all the way. Remove the dipstick again and check the oil level. If it's below the recommended level, add more oil as needed.

Step 7: Properly Dispose of the Old Oil

It's crucial to dispose of the old oil in an environmentally-friendly manner. Store the used oil in a sealed container and take it to a local recycling center or an authorized oil-collection facility.

Performing regular oil changes on your Ford Explorer will keep your engine operating efficiently and enhance its overall performance. Following these step-by-step instructions will allow you to complete the oil change process smoothly and with confidence.

What are some recommended performance upgrades for a Mercedes GLK 350 and how do they affect the mileage of the vehicle?

Looking to upgrade your Mercedes GLK 350? Discover recommended performance upgrades that can enhance your vehicle's power and efficiency without sacrificing mileage.

Mercedes GLK 350 mileage and performance upgrades Answers: 0 69

What are some key features of the Harley Davidson Freewheeler and how does it compare to other motorcycles in its class?

Discover the key features of the Harley Davidson Freewheeler and how it stacks up against other motorcycles in its class. Find out which makes it stand out.

Harley Davidson Freewheeler Answers: 0 63

What regular maintenance tasks should be done on a Mercedes-AMG GLC 43 SUV according to its recommended schedule?

Learn about the essential maintenance tasks for your Mercedes-AMG GLC 43 SUV based on its recommended schedule to keep it running smoothly.

Mercedes-AMG GLC 43 SUV maintenance schedule Answers: 0 59

What are some of the key features and specifications of the Harley Davidson Ultra Limited touring motorcycle?

Discover the key features and specifications of the Harley Davidson Ultra Limited touring motorcycle, including powerful engine, comfortable seating, and advanced technology. Find out more here.

Harley Davidson Ultra Limited Answers: 0 63

What are some essential tips for properly maintaining automatic transmission fluid to ensure optimal performance and longevity of your vehicle?

Learn the essential tips for maintaining automatic transmission fluid to keep your vehicle running smoothly for years to come. Proper maintenance is key!

automatic transmission fluid maintenance tips Answers: 0 56

Steps for Ford Explorer oil change?