How to perform DIY oil change on BMW 520i?

Learn how to perform a DIY oil change on your BMW 520i with our step-by-step guide. Save money and maintain your car's performance with ease.

Subject: DIY oil change for BMW 520i
Date: 12/17/2023 Status: SOLVED
3 answered / 1 voted, viewed icon

158 viewed.

maxwellmo - Sunday, December 17, 2023 156

How to Perform DIY Oil Change on BMW 520i

In order to maintain the optimal performance of your BMW 520i, regular oil changes are essential. While you can always take your car to a professional mechanic for an oil change, performing this task yourself can save you money and give you a better understanding of your vehicle's maintenance routine. Here's how you can perform a DIY oil change on your BMW 520i:

Materials and Tools Required:

5 quarts of BMW approved engine oil
Oil filter and oil filter wrench
Oil drain pan
Ramps or jack stands
Socket set and wrench
Oil filter housing cap wrench
Funnel
Disposable gloves

Step-by-Step Guide:

Make sure your vehicle is parked on a level surface and the engine is cool.
Raise the front of your BMW 520i using ramps or jack stands to gain access to the underside of the vehicle.
Locate the oil drain plug at the bottom of the oil pan.
Place the oil drain pan beneath the drain plug and use a socket or wrench to loosen and remove the drain plug.
Allow the old oil to completely drain into the drain pan.
Once the oil has fully drained, reinstall the drain plug and tighten it securely.
Locate the oil filter housing, usually positioned at the top of the engine.
Using an oil filter wrench, carefully loosen and remove the oil filter housing cap to access the oil filter.
Remove the old oil filter and replace it with a new one, ensuring the rubber gasket is properly seated.
Apply a small amount of fresh oil to the rubber gasket of the new oil filter.
Reinstall the oil filter housing cap and tighten it securely.
Locate the oil fill cap on top of the engine and remove it.
Place a funnel into the oil fill hole and pour in the recommended amount of BMW approved engine oil.
Double-check the oil level using the dipstick and adjust if necessary. Ensure the oil level is within the recommended range.
Reinstall the oil fill cap firmly.
Lower your BMW 520i from the ramps or jack stands.
Start the engine and let it run for a few minutes to allow the oil to circulate.
Check for any oil leaks around the drain plug and oil filter housing.
Turn off the engine and wait for a few minutes to allow the oil to settle.
Check the oil level again using the dipstick and add more oil if necessary.

Performing a DIY oil change on your BMW 520i ensures that you have control over the quality of oil used and allows you to become more familiar with your car's engine components. Remember to dispose of the used oil responsibly by taking it to a local recycling center or an authorized oil disposal facility. Regular oil changes, along with other routine maintenance tasks, will help keep your BMW 520i running smoothly for years to come.

Accepted Answer

The best Reply

ANSWERS Write an Answer

❝How to perform DIY oil change on BMW 520i?❞ answers. jack19 asked first. Total 3 replies.

Lisa - Sunday, December 17, 2023 156

DIY Oil Change on BMW 520i - Step-by-Step Guide

Performing a DIY oil change on your BMW 520i can save you time and money while ensuring your vehicle's engine maintains optimal performance. Follow these steps to successfully complete an oil change:

Step 1: Gather the Necessary Tools and Materials

Before starting the oil change, ensure you have the following:

Oil drain pan
Ratchet or socket wrench with appropriate sizes
Oil filter wrench
New oil filter
New engine oil (refer to the owner's manual for the recommended oil type and quantity)
Funnel
Rubber gloves
Shop towels or rags

Step 2: Prepare Your Vehicle

Park your BMW 520i on a flat surface and engage the parking brake. Allow the engine to cool down for a few minutes before starting the oil change process.

Step 3: Locate the Oil Drain Plug

Crawl under the vehicle and locate the oil drain plug. It is usually located on the bottom of the engine oil pan. Position the oil drain pan underneath the plug to catch the oil.

Step 4: Remove the Oil Drain Plug

Using the ratchet or socket wrench, carefully loosen and remove the oil drain plug. Allow the old oil to completely drain into the pan.

Step 5: Replace the Oil Filter

Using the oil filter wrench, remove the old oil filter. Apply a thin layer of new oil to the rubber gasket of the new oil filter and screw it in place. Make sure it is tightened securely by hand.

Step 6: Drain the Remaining Oil

While the oil filter is being replaced, wait for the remaining oil in the engine to drain completely.

Step 7: Install the Oil Drain Plug

Clean the oil drain plug, then reinstall it once the old oil has finished draining. Ensure it is tightened securely, but avoid overtightening.

Step 8: Add New Engine Oil

Locate the oil filler cap on the top of the engine and remove it. Insert a funnel and carefully pour the recommended amount and type of new engine oil into the engine. Refer to your owner's manual for the specific oil capacity.

Step 9: Check the Oil Level

After adding the new oil, wait a few minutes for it to settle, then use the dipstick to check the oil level. Ensure it is within the recommended range on the dipstick.

Step 10: Clean Up and Dispose of Old Oil

Clean any spilled oil around the oil filter and oil drain plug area. Dispose of the old oil responsibly by taking it to a designated recycling facility or a local auto parts store that accepts used oil.

Step 11: Recap and Maintenance

Recap the oil filler cap and start the engine. Let it run for a few minutes, then check for any leaks. Monitor the oil level periodically to ensure it remains within the recommended range and follow your vehicle's regular maintenance schedule.

Performing DIY oil changes on your BMW 520i is a relatively simple process that can help extend your vehicle's lifespan and improve its overall performance. However, always refer to your owner's manual for specific instructions and consult a professional if you are uncertain about any steps.

What are some recommended performance upgrades for a Mercedes GLK 350 and how do they affect the mileage of the vehicle?

Looking to upgrade your Mercedes GLK 350? Discover recommended performance upgrades that can enhance your vehicle's power and efficiency without sacrificing mileage.

Mercedes GLK 350 mileage and performance upgrades Answers: 0 644

What are some key features of the Harley Davidson Freewheeler and how does it compare to other motorcycles in its class?

Discover the key features of the Harley Davidson Freewheeler and how it stacks up against other motorcycles in its class. Find out which makes it stand out.

Harley Davidson Freewheeler Answers: 0 510

What regular maintenance tasks should be done on a Mercedes-AMG GLC 43 SUV according to its recommended schedule?

Learn about the essential maintenance tasks for your Mercedes-AMG GLC 43 SUV based on its recommended schedule to keep it running smoothly.

Mercedes-AMG GLC 43 SUV maintenance schedule Answers: 0 331

What are some of the key features and specifications of the Harley Davidson Ultra Limited touring motorcycle?

Discover the key features and specifications of the Harley Davidson Ultra Limited touring motorcycle, including powerful engine, comfortable seating, and advanced technology. Find out more here.

Harley Davidson Ultra Limited Answers: 0 426

What are some essential tips for properly maintaining automatic transmission fluid to ensure optimal performance and longevity of your vehicle?

Learn the essential tips for maintaining automatic transmission fluid to keep your vehicle running smoothly for years to come. Proper maintenance is key!

automatic transmission fluid maintenance tips Answers: 0 303

Onhlp.com

How to perform DIY oil change on BMW 520i?