What is the recommended oil change procedure for the GLC 43 SUV?

What is the recommended oil change procedure for the GLC 43 SUV?

When it comes to maintaining your GLC 43 SUV, following the recommended oil change procedure is crucial for optimal performance and longevity.

Here are the steps involved in the recommended oil change procedure:

1. Prepare the vehicle: Park the GLC 43 SUV on a level surface and ensure the engine has cooled down.
2. Locate the oil drain plug: Using a jack or ramps, access the oil drain plug located underneath the engine.
3. Drain the old oil: Place an oil catch pan beneath the drain plug and unscrew it using a wrench. Allow the old oil to completely drain out.
4. Replace the oil filter: Locate the oil filter, typically located near the drain plug. Unscrew it using an oil filter wrench and replace it with a new one.
5. Tighten the drain plug: Once the oil has fully drained, clean the drain plug and tighten it back into place. Be careful not to overtighten.
6. Add new oil: Consult the vehicle owner's manual for the recommended oil type and capacity. Using a funnel, pour in the new oil slowly.
7. Check the oil level: Start the engine and let it run for a few minutes. Turn off the engine, wait a couple of minutes, and then check the oil level using the dipstick. Top up if necessary.
8. Dispose of the old oil: Properly dispose of the used oil at a local recycling center or authorized collection facility. Do not pour it down the drain or in the trash.

Following this recommended oil change procedure as specified in the GLC 43 SUV's owner's manual will help keep your vehicle running smoothly and protect its engine from premature wear and damage.