Resolving FL Error on Whirlpool Calypso Washer

If you own a Whirlpool Calypso washer, you may have encountered the FL error code, which stands for "Overfill." This error typically occurs when the washer detects that there is too much water in the tub. Fortunately, there are several steps you can take to resolve this issue.

1. Stop the Cycle

If the FL error appears on your washer's display, the first thing you should do is stop the cycle immediately. This will prevent any further damage or water overflow.

2. Check Water Inlet Hoses

Inspect the water inlet hoses connected to the back of your washer. Make sure they are not kinked, damaged, or clogged. If you find any issues, replace the hoses as necessary. Also, check that the water supply valves are fully open and allowing adequate water pressure.

3. Verify the Water Level Pressure Switch

The FL error may be caused by a malfunctioning water level pressure switch. This switch is responsible for detecting and controlling the water level in the washer. Inspect the pressure switch to ensure it is properly connected and not damaged. If you suspect it is faulty, consider replacing it with a new one.

4. Clean the Drain Pump Filter

A clogged drain pump filter can disrupt the water drainage process, leading to an FL error. Locate the drain pump filter, usually located at the bottom front of the washer. Remove the filter and clean out any debris or lint that may have accumulated. Once cleaned, reattach the filter securely.

5. Restart the Washer

After performing the necessary checks and maintenance, restart your Whirlpool Calypso washer and see if the FL error code reappears. If the issue persists, it is advisable to contact a professional technician or the Whirlpool customer support team for further assistance.

Remember to always follow the manufacturer's guidelines and safety precautions when inspecting or repairing your washer. If you are unsure about any step or lack the necessary skills, it is best to seek professional help to avoid any accidents or further damage to your appliance.

By following these steps, you can effectively resolve the FL error on your Whirlpool Calypso washer and enjoy hassle-free laundry sessions once again!