Resetting Suction on Shark Vacuum

If you own a Shark vacuum and find that the suction power has decreased significantly, it may be time to reset the suction and get your vacuum working like new again. This process is simple and can be done at home without professional help. Follow the steps below to reset the suction on your Shark vacuum:

1. Unplug the Vacuum:

Before attempting any maintenance or reset on your Shark vacuum, always make sure to unplug it from the power source. This is crucial in ensuring your safety throughout the process.

2. Inspect the Vacuum:

Thoroughly check your Shark vacuum for any clogs or blockages that may be hindering the suction. Look for any debris, such as hair or large pieces of debris, that may be stuck in the vacuum cleaner brush, hose, or any other areas. Clear out any visible clogs using a pair of scissors or your fingers, while being cautious not to damage the vacuum or your fingers.

3. Remove and Clean the Filters:

The suction of your Shark vacuum may be compromised if the filters are dirty or clogged. Locate the filters of your vacuum, which are usually located in the dust cup and near the motor. Remove the filters carefully, keeping in mind the instructions provided by the manufacturer. Rinse the filters under running water, ensuring to remove any dirt or debris that may have accumulated on them. Allow the filters to air-dry completely before reattaching them to the vacuum.

4. Empty the Dust Cup:

If the dust cup of your Shark vacuum is full, it can limit the suction power. Ensure that the dust cup is emptied and cleaned regularly to prevent any buildup. Follow the instructions provided by the manufacturer to safely remove and dispose of the contents. Clean the dust cup with water and allow it to dry completely before reinserting it into the vacuum.

5. Brushroll Maintenance:

The brushroll of your Shark vacuum can accumulate hair, threads, and other debris over time. This can impede the suction power of the vacuum. Check the brushroll for any entangled hair or debris and remove them carefully. Use a pair of scissors to cut off any tangled hair or threads that are difficult to remove by hand.

6. Reassemble and Test:

Once you have completed the cleaning process and ensured all parts are dry, carefully reassemble the vacuum according to the manufacturer's instructions. Plug the vacuum back into the power source and turn it on to test the suction power. You should notice a significant improvement in suction if the reset process was successful.

7. Regular Maintenance:

To maintain optimal suction performance of your Shark vacuum, it is recommended to perform regular maintenance. Clean the filters, empty the dust cup, and check for clogs or blockages periodically. This will ensure that your Shark vacuum operates at its peak efficiency and prolong its lifespan.

By following these steps, you can successfully reset the suction power on your Shark vacuum and enjoy a thoroughly clean home once again.