Oil Change Procedure at Cross

If you own a vehicle, you are probably aware of the importance of regular oil changes to maintain its performance and longevity. In this article, we will go over the oil change procedure at Cross, providing you with a step-by-step guide to ensure a smooth and hassle-free oil change experience.

Step 1: Gather the necessary tools and materials

Before getting started, make sure you have all the required tools and materials handy. This typically includes:

• Engine oil (check your vehicle's manual for the recommended type and quantity)
• New oil filter
• Oil filter wrench
• Wrench set
• Oil drain pan
• Funnel
• Rags or paper towels
• Safety gloves

Step 2: Prepare your vehicle

Park your vehicle on a level surface and engage the parking brake. Pop the hood and locate the oil filler cap.

Step 3: Drain the old oil

Using the wrench set, locate the oil drain plug underneath your vehicle. Place the oil drain pan underneath the plug, then carefully loosen and remove the plug. Allow the old oil to completely drain out into the pan. Once drained, reinstall and tighten the drain plug securely.

Step 4: Replace the oil filter

Locate the oil filter, which is usually located near the engine. Use the oil filter wrench to loosen and remove the old filter. Apply a small amount of new oil to the rubber gasket of the new filter to ensure a proper seal. Then, install the new filter by hand, ensuring it is tightened securely but not overly tight.

Step 5: Add the new oil

Using the funnel, slowly pour the new oil into the oil filler cap. Be sure to pour the correct amount as recommended by your vehicle's manual. Once filled, securely replace the oil filler cap.

Step 6: Clean up and check oil level

Wipe away any spilled oil and ensure the oil cap and oil filter are properly tightened. Start the engine and let it run for a few minutes. Then, turn off the engine and wait for a few minutes to allow the oil to settle. Use the dipstick to check the oil level, adding more if necessary.

And there you have it! Following these steps, you have successfully performed an oil change at Cross. Regularly changing your vehicle's oil will help maintain optimal performance, improve fuel efficiency, and extend the life of your engine.