Oil Change for Renault Captur

The Renault Captur is a popular crossover SUV known for its stylish design and efficient performance. Regular maintenance is crucial to keep your Captur running smoothly, and one essential task is changing the engine oil. Here's a guide on how to perform an oil change for your Renault Captur:

Step 1: Gather the Necessary Tools and Materials

Before you begin the oil change, make sure you have the following:

• Oil filter
• Engine oil (check your vehicle's manual for the recommended type and quantity)
• Oil filter wrench
• Oil pan or container to collect the old oil
• Funnel
• New oil drain plug washer (if needed)
• Ratchet set
• Oil filter removal tool

Step 2: Prepare the Vehicle

Park your Renault Captur on a level surface and engage the parking brake. It's also a good idea to place wheel chocks behind the rear tires to ensure stability during the oil change.

Step 3: Locate the Oil Drain Plug

Crawl under the vehicle and locate the oil drain plug. It is usually located on the bottom of the engine oil pan. Consult your owner's manual if you have trouble finding it. Once located, position the oil pan directly beneath the drain plug.

Step 4: Drain the Old Oil

Using a ratchet set, loosen the oil drain plug in a counterclockwise direction. Once it is loose, you can remove it by hand. Allow the old oil to drain completely into the oil pan. Make sure to properly dispose of the old oil later at a designated recycling center or auto repair shop.

Step 5: Replace the Oil Filter

Using an oil filter removal tool, carefully remove the old oil filter. Be prepared for some additional oil spillage when removing the filter. Before installing the new oil filter, apply a thin layer of fresh oil to the rubber gasket of the new filter. Screw the new oil filter on by hand until it is snug, and then give it an additional half-turn using the oil filter wrench.

Step 6: Add Fresh Oil

Locate the oil filler cap on the top of your Renault Captur's engine. Remove it and insert a funnel into the opening. Pour the recommended amount of fresh engine oil into the engine, making sure not to overfill. Refer to your owner's manual for the specific oil capacity of your vehicle.

Step 7: Final Check

Once the fresh oil has been added, double-check that the oil drain plug is properly tightened. Wipe off any spills or drips from the oil filter or surrounding areas. Reinstall the oil filler cap securely. Start the engine and let it run for a few minutes, then turn it off and check the oil level with the dipstick. Add more oil if necessary.

Congratulations! You have successfully performed an oil change for your Renault Captur. Regular oil changes are essential for maintaining the longevity and performance of your vehicle, so be sure to stick to your manufacturer's recommended maintenance schedule.