How to Restart BMW Connected Drive

If you are experiencing issues with your BMW Connected Drive system, a simple restart might solve the problem. Restarting helps in resetting the software and can resolve minor glitches or errors that may occur. Here's a step-by-step guide on how to restart your BMW Connected Drive.

Step 1: Turn off the Ignition

Park your BMW vehicle in a safe location and ensure that the ignition is turned off. This will help ensure a proper restart of the system.

Step 2: Open the Hood

Pop open the hood of your BMW by pulling the hood release lever located inside the cabin, usually beneath the dashboard or near the driver's side door. Lift the hood latch outside the vehicle to fully open it.

Step 3: Locate the Battery

Now, locate the battery in your BMW. The battery is usually located in the engine bay. It might be covered by a plastic casing, so you may need to remove it to uncover the battery.

Step 4: Disconnect the Negative Terminal

Identify the negative terminal of the battery. It is usually marked with a "-" sign. Using a suitable wrench or socket, loosen the nut on the negative terminal and disconnect the cable from the battery. Make sure to isolate the cable from the terminal to avoid any accidental reconnection.

Step 5: Wait for 10-15 minutes

After disconnecting the negative terminal, leave it disconnected for at least 10-15 minutes. This will allow any residual power in the system to drain completely. It helps in ensuring a complete restart of the BMW Connected Drive system.

Step 6: Reconnect the Negative Terminal

After the waiting period, it's time to reconnect the negative terminal of the battery. Ensure a secure connection by tightening the nut with the wrench or socket.

Step 7: Close the Hood

Lower the hood of your vehicle and ensure it is securely closed. The connection between the negative terminal and the battery should be established once again.

Step 8: Start the Vehicle

Get inside your BMW, insert the key into the ignition, and start the vehicle. The BMW Connected Drive system should now initiate the reboot process and start functioning normally.

Restarting your BMW Connected Drive may fix various issues such as unresponsive screens, connectivity problems, or intermittent malfunctions. However, if the problems persist even after restarting, it is recommended to contact an authorized BMW service center for further assistance.

Remember to refer to your BMW vehicle's manual for specific instructions and precautions related to your model, as different models might have unique variations in their battery locations or procedures.