How to Change Oil in BMW 220i Active Tourer

The BMW 220i Active Tourer is an impressive vehicle with a powerful engine, and like any car, it requires regular maintenance to ensure optimal performance. One crucial aspect of proper maintenance is changing the engine oil regularly. In this article, we will guide you through the step-by-step process of changing the oil in your BMW 220i Active Tourer.

1. Gather the Necessary Tools

Before beginning the oil change process, make sure you have the following tools readily available:

• Socket wrench set
• Oil filter wrench
• Oil drain pan
• Oil filter
• New oil
• Replacement oil drain plug washer

2. Prepare Your Vehicle

Park your BMW 220i on a flat surface and let the engine cool down for a while. This will make the oil draining process easier and safer. It is also recommended to put on some gloves before getting started.

3. Locate the Oil Drain Plug

Underneath the vehicle, find the oil drain plug. It is usually situated at the bottom of the engine oil pan. Position the oil drain pan directly beneath the drain plug to catch the old oil efficiently.

4. Drain the Old Oil

Using a socket wrench, carefully remove the drain plug by turning it counterclockwise. Allow the old oil to completely drain into the oil pan. Be cautious as the oil may still be hot, causing burns or spills.

5. Replace the Oil Filter

While the oil is draining, locate the oil filter. Using an oil filter wrench, carefully remove the old oil filter by turning it counterclockwise. Ensure that you properly dispose of the old filter. Apply a thin layer of fresh oil to the rubber seal of the new oil filter and screw it into place. Be cautious not to overtighten the filter.

6. Replace the Drain Plug Washer

Before reinstalling the drain plug, ensure the old washer is removed. It is crucial to replace it with a new washer to ensure a proper seal. Place the new drain plug washer onto the drain plug.

7. Refill with New Oil

Now it's time to refill the engine with fresh oil. Refer to your BMW 220i Active Tourer's manual to determine the appropriate oil type and capacity. Use a funnel to pour the new oil into the engine oil filler cap. Once the oil is filled to the correct level, replace the filler cap securely.

8. Check the Oil Level

Start your BMW's engine and let it run for a few minutes. Turn off the engine and wait for a couple of minutes to allow the oil to settle. Then, check the oil level using the dipstick. If it is below the recommended level, add more oil until it reaches the appropriate mark.

9. Dispose of the Used Oil

Properly dispose of the used oil by taking it to an authorized collection center. Do not pour it down the drain or throw it in the trash. Many service stations or garages provide recycling services for used oil.

By following these steps, you can successfully change the oil in your BMW 220i Active Tourer. Regular oil changes are essential for maintaining the performance and longevity of your vehicle's engine. Remember to consult your vehicle's manual for any specific instructions or consult a professional if you are unsure.