Dodge Durango 6.4L V8 Oil Change

The Dodge Durango with a 6.4L V8 engine is a powerful and capable SUV that requires regular maintenance to keep it running smoothly. One crucial aspect of this maintenance routine is changing the engine oil at regular intervals. In this article, we will guide you on how to perform an oil change on your Dodge Durango 6.4L V8.

Step 1: Gather the necessary materials

Before you begin, make sure you have all the required materials. You will need:

• Oil filter compatible with your Durango 6.4L V8 engine
• New engine oil of the recommended viscosity and grade
• Oil filter wrench
• Oil drain pan
• Socket wrench set
• Funnel
• Clean rags or paper towels

Step 2: Prepare your Durango

Park your Dodge Durango on a level surface and turn off the engine. Engage the parking brake for added safety. Let the engine cool for a few minutes before proceeding with the oil change.

Step 3: Locate the oil drain plug

Lift the front of your Durango using a jack to gain access to the undercarriage. Locate the oil drain plug underneath the engine. It is typically a large bolt-like plug located at the bottom of the oil pan.

Step 4: Drain the old oil

Position the oil drain pan beneath the oil drain plug. Using a socket wrench, carefully loosen the drain plug in a counterclockwise direction. Allow the old oil to drain completely into the pan. Once drained, securely tighten the drain plug back in place.

Step 5: Replace the oil filter

Locate the oil filter, which is usually on the side of the engine. Using an oil filter wrench, carefully loosen and remove the old filter in a counterclockwise direction. Before installing the new filter, apply a small amount of fresh engine oil to the rubber gasket on the top of the filter. This helps create a proper seal. Install the new oil filter by hand, ensuring it is tightened according to the manufacturer's instructions.

Step 6: Add the new oil

Locate the oil filler cap on the top of your Durango's engine. Remove the cap and set it aside. Insert the funnel into the oil filler hole. Slowly pour the recommended amount of new engine oil into the engine, as specified in your vehicle's owner manual. Once filled, replace the oil filler cap securely.

Step 7: Clean up and dispose of the old oil

Dispose of the old oil in accordance with local regulations. Be sure to clean up any spills or drips with a rag or paper towels. Double-check that the drain plug and oil filter are properly tightened.

Step 8: Reset the oil change reminder

Modern Dodge Durango models have an oil change reminder system. Consult your owner's manual to learn how to reset the system to ensure accurate maintenance intervals and reminders.

Conclusion

Performing regular oil changes is essential for keeping your Dodge Durango 6.4L V8 engine in optimal condition. By following the steps outlined in this guide, you can ensure a successful oil change and prolong the life of your vehicle.