Changing Oil in Nissan Terrano

The Nissan Terrano is a popular SUV known for its durability and off-road capabilities. Regular maintenance of your vehicle is essential to keep it running smoothly, and one crucial aspect of maintenance is changing the engine oil. The oil change process is relatively straightforward and can be done at home with the right tools and some automotive knowledge. Here is a step-by-step guide on how to change the oil in a Nissan Terrano:

Step 1: Gather the Required Materials

Before starting the process, make sure you have all the necessary materials handy. This includes engine oil (check the owner's manual for the recommended type and quantity), an oil filter, an oil filter wrench, a socket wrench set, an oil pan, a funnel, and gloves.

Step 2: Prepare the Vehicle

Park your Nissan Terrano on a level surface and engage the parking brake. Ensure that the engine has cooled down before proceeding to avoid burning yourself. It is also recommended to wear protective gloves to prevent any spillage on your hands.

Step 3: Locate the Drain Plug and Oil Filter

To access the drain plug and oil filter, you may need to raise the vehicle using jack stands or ramps. Locate the oil pan underneath the engine and identify the drain plug. The oil filter is generally located near the bottom of the engine.

Step 4: Drain the Old Oil

Position the oil pan beneath the drain plug to catch the old oil. Use the socket wrench to carefully loosen the drain plug in an anticlockwise direction. Once it is loose enough, unscrew it by hand and let the old oil drain into the pan. Ensure that you have a sufficient capacity oil pan to contain all the oil.

Step 5: Replace the Oil Filter

After draining the old oil, locate the oil filter and use the oil filter wrench to remove it. Ensure that the rubber gasket from the previous filter is not stuck to the engine. Apply some new oil to the rubber gasket of the new oil filter and screw it into place by hand. Use the oil filter wrench to tighten it appropriately.

Step 6: Refill with New Oil

Replace the drain plug back into the oil pan and tighten it using the socket wrench. Now, locate the oil fill cap on the top of your engine and remove it. Insert a funnel and slowly pour in the new engine oil, following the recommended quantity mentioned in your owner's manual. Ensure that you pour the oil carefully to avoid spillage.

Step 7: Check Oil Level and Clean Up

Once you have poured the new oil, replace the oil fill cap and run the engine for a few minutes to allow the oil to circulate through the system. After a few minutes, turn off the engine and wait for a while. Check the oil level using the dipstick, and if necessary, add more oil until it reaches the recommended level. Finally, clean up any spilled oil and dispose of the old oil properly at a recycling center or with a professional.

By following these simple steps, you can change the oil in your Nissan Terrano and ensure the longevity of your engine. Regularly changing the oil at recommended intervals will keep your SUV running smoothly, providing you with a reliable and enjoyable driving experience.