BMW 650i xDrive DIY Oil Change

Performing regular oil changes is crucial for maintaining the performance and longevity of your BMW 650i xDrive. While many car owners prefer to take their vehicles to a professional for an oil change, it is also possible to carry out this task yourself, saving time and money. In this article, we'll guide you through the step-by-step process of performing a DIY oil change for your BMW 650i xDrive.

What You'll Need

• Oil filter
• Engine oil suitable for your vehicle (check owner's manual)
• Oil drain pan
• Socket wrench
• Oil filter wrench
• Funnel
• New oil drain plug washer (if necessary)

Step 1: Prepare the Vehicle

Make sure your BMW 650i xDrive is parked on a flat surface and the engine has cooled down. This is important to ensure your safety and prevent any burns.

Step 2: Locate the Oil Drain Plug

Crawl under the vehicle, and using the socket wrench, locate the oil drain plug. You may need to remove the engine splash guard to access it. If your vehicle has a plastic cover, be careful not to damage it while removing it.

Step 3: Drain the Oil

Place the oil drain pan beneath the oil drain plug. Use the socket wrench to loosen and remove the drain plug carefully. Allow the old oil to drain fully into the pan. Once drained, replace the drain plug and tighten it to the manufacturer's specifications.

Step 4: Replace the Oil Filter

Using the oil filter wrench, unscrew the old oil filter in a counterclockwise direction. Once removed, apply a small amount of clean oil to the rubber gasket of the new oil filter. Install the new oil filter by hand and tighten it only until it is snug. Do not overtighten.

Step 5: Add Fresh Oil

Open the hood of your BMW 650i xDrive and locate the oil filler cap. Remove it. Using a funnel, pour the recommended amount and type of fresh engine oil into the oil filler hole. Refer to your owner's manual for the specific oil capacity and type required for your vehicle.

Step 6: Double-Check Oil Level

After adding the fresh oil, wait for a few minutes to allow it to settle. Then, accurately check the oil level using the dipstick. Ensure the oil level is within the recommended range. If required, add more oil to reach the appropriate level.

Step 7: Clean Up and Dispose of Old Oil

Dispose of the old oil responsibly by taking it to a local recycling center or an auto parts store that accepts used oil. Clean up any spills and properly secure all the components you removed.

And there you have it! By following these steps and investing a little time, you will be able to successfully perform an oil change on your BMW 650i xDrive, giving your vehicle the care it deserves. Remember to consult your owner's manual for any specific instructions or considerations for your vehicle model.