BMW 535i Oil Change DIY

Regular maintenance is crucial to keep your BMW 535i running smoothly and efficiently. One of the most important aspects of maintenance is regular oil changes. While it's always recommended to have your oil changed by a professional, doing it yourself can save you both time and money. Here is a step-by-step guide on how to change the oil in your BMW 535i.

What You'll Need:

• Oil filter
• Oil drain plug gasket
• New engine oil (check your car's manual for the recommended grade)
• Oil filter wrench
• Socket wrench or spanner
• Oil drain pan
• Funnel
• Rubber gloves
• Ramps or jack stands (for safe lifting)

Step 1: Prepare Your Vehicle

Park your BMW 535i on a level surface and engage the parking brake. Allow the engine to cool down completely to avoid any burns. If you have ramps or jack stands, use them to elevate the front of your vehicle, ensuring proper clearance underneath.

Step 2: Locate the Oil Drain Plug

Crawl under your BMW 535i and locate the oil drain plug. It is generally situated on the bottom of the oil pan. Place the oil drain pan directly underneath the plug.

Step 3: Drain the Old Oil

Using a socket wrench or spanner, carefully loosen the oil drain plug by turning it counterclockwise. Once loose, remove the plug completely and allow the old oil to drain out completely into the pan. Be cautious as the oil might still be hot.

Step 4: Replace the Oil Filter

Locate the oil filter, which is usually positioned near the oil pan. Unscrew it using an oil filter wrench in a counterclockwise direction. Be prepared as some oil may spill out. Discard the old filter and replace it with a new one. Make sure to lubricate the rubber gasket of the new filter with some new oil before installing it. Tighten the oil filter by turning it clockwise until it is snug.

Step 5: Install the New Oil Drain Plug Gasket

Before reinstalling the oil drain plug, replace the old gasket with a new one to ensure a proper seal. Simply remove the old gasket, clean the area, and place the new gasket over the plug.

Step 6: Refill with New Engine Oil

At this stage, you can remove the ramps or jack stands from under your vehicle. Using a funnel, slowly pour the recommended amount and grade of new engine oil into the oil fill opening under the hood. Refer to your car's manual for the correct oil capacity and specifications. Once filled, double-check for any leaks or spills.

Step 7: Double Check and Dispose of Old Oil

Take a moment to verify that everything is properly reinstalled and that you haven't missed any steps. Clean up any spills or leaks you may have noticed. It's important to dispose of the old oil responsibly. Take it to a recycling center or an automotive store that accepts used oil.

Congratulations! You have successfully performed an oil change on your BMW 535i. Regular oil changes in accordance with your car's recommended service intervals will help keep your engine running smoothly for miles to come.